HDPE
HDPEisawhitepowderorgranularproduct.Non-toxic,tasteless,crystallinitywas80%~90%,softeningpointis125l~35℃,usingtemperatureis100℃;Hardness,tensilestrengthandcreepwerebetterthanlowdensitypolyethylene.Goo
HDPE is a white powder or granular product. Non-toxic, tasteless, crystallinity was 80% ~ 90%, softening point is 125 l ~ 35 ℃, using temperature is 100 ℃; Hardness, tensile strength and creep were better than low density polyethylene. Good abrasion resistance, electrical insulation, toughness and cold resistance; Good chemical stability, insoluble in any organic solvent at room temperature, resistant to corrosion by acid, alkali and various salts.
1. Excellent impact resistance
2. High tensile strength
3. Low moisture absorption
4. Good Chemical resistance
5. Light in weight
6. Good thermoforming properties
APPLICATION
Midical components, Sealing components, it is used in the field of Chemical, Mechanical, Electric, Clothing, Food etc.
PROPERTIES
PHYSICAL PROPERTIES | TEST | UNIT | RESULT |
Specific gravity | ISO1183 | g/cm³ | 0.96 |
Water absorption | ISO62 | % | 0.01 |
Maximum service temp. Upper temp. limit (no stronger mechanical stree involved) | - | ℃ | 80 |
Lower temp. | - | ℃ | 50 |
Mechnical Properties | Test | Unit | Result |
Tensile strength at yield | ISO 527 | MPa | 22 |
Elongation at yield | ISO 527 | % | 9 |
Tensile strength at break | ISO 527 | MPa | - |
Elongation at break | ISO 527 | % | 300 |
Impact strength | ISO 179 | kJ/㎡ | no break |
Notch impact strength | ISO 179 | kJ/㎡ | 19 |
Ball indentation/ Rockwell hardness | ISO 2039-1 | MPa | 40 |
Shore-D | DIN 53505 | - | 64 |
Flexural strength | ISO 178 | MPa | - |
Modulas of elasticity | ISO 527 | MPa | 900 |
SPECIFICATION
HDPE Sheet
LENTH × WIDTH (mm) | THICKNESS (mm) |
1000×1000, 1000×2000 | 1-100 |
HDPE Rod
DIAMETER (mm) | LENGTH (mm) |
10 - 250 | 1000 |
This is our standard size, other size is also available.
Other sizes we can also produce.